Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels | Tires | Spacers | Hub -- Sponsored by The Tire Rack (https://www.ft86club.com/forums/forumdisplay.php?f=24)
-   -   19x9.5 with +38!? All Around (https://www.ft86club.com/forums/showthread.php?t=44855)

mikeTee 08-21-2013 12:48 AM

19x9.5 with +38!? All Around
 
Thinking about getting some new wheels in 19x9.5. I already know the pros and cons of going with 19's, this thread is more so just to find the optimal fitment. I plan on doing the wheels and suspension at the same time, as a 19x9.5 setup is impractical on stock suspension, but what do you guys think about 19x9.5 +38 running on 245/35/19 wheels? I plan on lowering it an inch at a minimum to two inches, and I believe lowering the car adds negative camber. I know RavSpec did their 57xtreme 19x9.5 all around with a +43 offset and they claimed it would fit a 245/35/19 wheel. Played around on http://www.frsproject.com/tire_size.php and it looks good on paper, any thoughts? The manufacturer of the wheel offers offsets from +4 to +42 if +38 is cutting it too close on the front. I know a lot of people are doing 18x9.5 +38 as well, worst case maybe I'll go with 18's, but my heart is pretty much set on 19's.

Thanks in advance! :D

fatpwr 08-25-2013 02:02 AM

depending on how much camber you get from the drop. you should be able to clear perfectly fine. i don't see why you wouldn't when guys with 18x9.5 +35 with 245/40 fits fine with lowering springs only.


All times are GMT -4. The time now is 02:12 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.