shifterrr isssuesssssss!!!!!!!
 

ok I know it a tsb out for the shift rattle issues ....my issues is different4 time this happen to me first 3 time was jumping to 3 or out of 3 gear shifter got stuck and rattle like a rattle snake until I braked and drop my rpms down to idle then it released the shifter...any ideas onwhats going on

Try using your clutch pedal.

^ or proper english for that matter

Take it to the dealership.

clutch pedel wouldn't release shifter .....scion rep is coming down today to address issues

LMAO i saw this on ifunny,:bellyroll:

The way we are interpreting what you said:

When I shift from 3-4, or 4-3, sometimes it "rattles like a rattlesnake". This is called grinding - the high pitched buzz that you get is the gear teeth skipping off one another. It's caused by mistiming your clutch release and having the clutch engage the flywheel before you are actually in gear with the shifter. As a result you usually have to move back to neutral, pull the clutch, press it again, and then shift slower. Is that accurate?

IF so.... Push the clutch, shift, then release. Problem solved, and that's what everyone's telling you!

If not, then you have a reason to chat up the scion rep.

Granny shifting not double clutching like you should.

I have another idea of what's going on, your shift is not all the way up to 3rd gear.

+1

this was my first thought (After figuring out what OP was trying to say). Otherwise, it looks like a screwed up tranny.

:) I have another idea , maybe post in the issue section ?

I was hoping someone wasn't going to post this, because I wanted to! :popcorn:

got my gear box replace..... it was internal ... notyhing to do with the tsb ... or clutch