questions for Tein Monoflex owners
 

did you guys adjust the preload before the inital install

and also

did you load the suspension with the jack or just bolt it in while the car was in the air?

thank you.

I did the preload on my Street Flex's on the car because I wanted more preload after testing it. Originally I set a 1/4 inch preload all around, but ended up with 3/8 inch preload.

To do the install I put the car on jack stands then use my floor jack to load the fronts to get the endlinks off then unloaded to remove the rest.

For the rear, I loosened the lower control arm joint bolt so that the entire arm can swivel easier. Then I preload the arm to unbolt the endlink, then unload to remove the rest.

thanks