Cant find passenger window wire from drivers side remote.. help?
 

From drivers side remote you can control passengers side window.. so thought I could easily figure out the wires to passenger side window motor but I actually cant.

Managed to figure out drivers side window wire which (from memory) was pin 6. +12V was detected from pin 6 when window was rolling up. When window was rolling down pin 7 had 12V so that was easy.

However finding out passengers side window was not possible. Tried testing all the wires but nothing seemed to work. Anyone can help me out here..?


p.s. Reason for doing this is so I can install automatic window rolling up on lock module. I got drivers side window to roll up on lock but as I can not find wires to passengers side window, I cant get it to work. Pls help~

The passenger window is controlled from the Master switch via UART (Universal Asynchronous Receiver/Transmitter). Your best bet is to tap the passenger window switch.

We're you able to figure it out, also trying to make auto window module.