Any mags from other Scions or Subarus fit a FR-S
 

Are there any mags from older model Scions or Subarus that would fit a new Scion Fr-S? I wanted to pick up some used mags to put winter tires on. Not sure what would fit. Anybody have any suggestions?

like magazines...? is mag slang for wheel in quebec? the car is 5x100. the 1st gen tc and all subarus except 05+ sti share the same bolt pattern.

As mentioned, tC1 wheels will fit or can be made to fit fairly easily. There's a thread here of a member that put them on his car. They are the correct bolt pattern (5x100) and are very close to the stock wheels in size (17x7) and offset (+45).

They're only mags if they're made from magnesium. Not a very common wheel material.

http://www.ft86club.com/forums/showthread.php?t=7535

Scroll down to the OEM section to answer your question :thumbsup:

One thing to keep in mind is hub bore. HB size on the twins is 56.1mm.

Subaru standard hub bore is 56.1 mm, so OEM Subaru should be fine (if bolt pattern matches and offset fits).

Scion standard hub bore is 54.1, so you'll need to machine out the center by 2mm to get these to work.

Thanks for the input guys. I will make sure to use the term wheels instead of mags.

This thread is awesome. Thanks!

I meant the above thread is awesome.