Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   Fogs wiring; Will this work? (https://www.ft86club.com/forums/showthread.php?t=28431)

Khánh 02-07-2013 02:55 PM
Fogs wiring; Will this work?
 
1 Attachment(s)
I want to wire up my fogs, but I don't know much about wiring. Will this do the job?

Draco_PR23 02-09-2013 10:31 AM
I had in mind the same setup, I believe it should work

Khánh 02-09-2013 01:33 PM
cool. thanks

Acree 02-09-2013 03:18 PM
What relay are you using?

This wiring will not work unless it has pins internally tied together.

-Acree

Draco_PR23 02-09-2013 10:42 PM
Some one posted this site somewhere "http://autolumination.com/connectors.htm" and I was looking at it and I believe the "2 Channel 4 Blade Relay Pigtail & Plug (Heavy Duty)" should work.

mashal 02-09-2013 10:49 PM
Your wiring is fine, don't cheap out on the relay

Khánh 02-10-2013 01:09 AM
Quote:
Originally Posted by Draco_PR23 (Post 724506)
Some one posted this site somewhere "http://autolumination.com/connectors.htm" and I was looking at it and I believe the "2 Channel 4 Blade Relay Pigtail & Plug (Heavy Duty)" should work.

will "4 Blade 40 Amp Relay (Heavy Duty)"work ? (it's next to the one u mentioned)

http://www.autolumination.com/images...hematic_wm.jpg

Draco_PR23 02-10-2013 09:05 AM
Quote:
Originally Posted by Khánh (Post 724717)
will "4 Blade 40 Amp Relay (Heavy Duty)"work ? (it's next to the one u mentioned)

http://www.autolumination.com/images...hematic_wm.jpg
I think it should work too, I already ordered the bezels and the fog lights.
Once I get received them, I will try to figure out the harness and relay. Also I was thinking about getting the harness from Nigel since I will probably buy a few other stuff.

Khánh 02-10-2013 02:57 PM
Quote:
Originally Posted by Draco_PR23 (Post 725113)
I think it should work too, I already ordered the bezels and the fog lights.
Once I get received them, I will try to figure out the harness and relay. Also I was thinking about getting the harness from Nigel since I will probably buy a few other stuff.
i was going to order stuffs from him but i decided not to cuz of backorder and crap haha

zc06_kisstherain 02-11-2013 04:24 PM
I don't know i am right or not.
if you buy OEM fog light from Subaru, can't you install it Plug & Play on BRZ Premium?
I don't know on FRS

Sco2355 02-11-2013 04:29 PM
The entire front harness for the car is different on the BRZ than the FRS. I got all the diagrams. It's a single harness that the fogs are wired into versus the FRS harness, the fog wires are non-existant. When my bezels get here we are wiring them up to the OEM BRZ stalk I bought. It doesn't look difficult, just time consuming.

Khánh 02-11-2013 06:54 PM
Quote:
Originally Posted by zc06_kisstherain (Post 727707)
I don't know i am right or not.
if you buy OEM fog light from Subaru, can't you install it Plug & Play on BRZ Premium?
I don't know on FRS

i dunno.. I should have stated I want to do this on my frs

Draco_PR23 02-16-2013 01:44 PM
@Khánh
did you figured out the harness? I just received my bezels and fog lights but havent installed them yet.


All times are GMT -4. The time now is 10:11 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.