![]() |
JDM steering wheel off center after install
After installing my JDM steering wheel it's a few degrees off center. I've tried removing the wheel and repositioning it a few times but it always feel about 1-3 degrees off to the right or left. I'm thinking the splines are not matching the O.E.M steering wheel splines but I’d have to check when I have time. Would this be a easy fix or should I bring it in the shop to have it properly aligned?
|
I have the same problem after replacing with European stalk for fog light....
|
You have to make sure the wheels are straight and true before removal/install. If they are already straight then it might mean you will have to adjust the steering rack.
|
Quote:
|
this should be easily avoided by using a 1-2 long strips of painters tape and line up the steering wheel with the column. I would probably put 2 strips about 3 inches apart so that you can properly align the steering wheel after, even if it's turning.
|
| All times are GMT -4. The time now is 01:26 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.