Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Scion FR-S / Toyota 86 GT86 General Forum (https://www.ft86club.com/forums/forumdisplay.php?f=2)
-   -   What do you want for your frs/brz? (https://www.ft86club.com/forums/showthread.php?t=22333)

Andrew360 11-15-2012 06:20 PM
What do you want for your frs/brz?
 
What do you guys want to be built for your frs/brz? I'm trying to work with a shop and they need ideas and suggestions on what to fabricate. This can be anything from a single nut to an armrest, to anything else you guys might want to be put into production. I'm trying to go for something that other people have not yet produced.

GTB/ZR-1 11-15-2012 06:25 PM
Not yet produced? A toilet seat, maybe?

SubarooMike 11-15-2012 06:27 PM
I just want A brz.....

JoeBoxer 11-15-2012 06:33 PM
Probably not possible from a small company but some decent looking tailights would be great.

Norkoastal 11-15-2012 06:49 PM
Quote:
Originally Posted by Andrew360 (Post 559288)
What do you guys want to be built for your frs/brz? I'm trying to work with a shop and they need ideas and suggestions on what to fabricate. This can be anything from a single nut to an armrest, to anything else you guys might want to be put into production. I'm trying to go for something that other people have not yet produced.
I'd say simple stuff would include:
visors with lighting, under dash lighting, door sill lighting
3rd brake delete kit with low pro replacement.
Rear center console storage (over existing "hump")
Trunk organizer
Sunglasses overhead storage
Radar detector storage cubby
armrest kit - stage 1 cheap simple/removable, - stage two hinge design, stage 3 sliding with magnetic catches.
instrument cluster pods for gauges (over MPH section)
Rear speaker brackets for larger speakers
Rear upper seat with speaker opening

Maik L 11-15-2012 07:50 PM
what I want now is a armrest with matching design - maybe a slider

dem00n 11-15-2012 07:55 PM
A good 3rd brake light kit.

russv 11-15-2012 08:15 PM
Quote:
Originally Posted by dem00n (Post 559441)
A good 3rd brake light kit.
For the lower fog light.

DanoFA20 11-15-2012 08:21 PM
RCE Suspension, stoptech rotors /pads, Nice Perrin or Invidia cat back exhaust a STG 1 ecu tune. bigger sway bars upper strut brace .
Works Miester S1R 17x8 225/40 tires.
that'll do pig that'll do :happy0180:

Freeman 11-15-2012 08:45 PM
Quote:
Originally Posted by Andrew360 (Post 559288)
What do you guys want to be built for your frs/brz? I'm trying to work with a shop and they need ideas and suggestions on what to fabricate. This can be anything from a single nut to an armrest, to anything else you guys might want to be put into production. I'm trying to go for something that other people have not yet produced.
What're you able to produce at the moment?

Things that I would be interested in:
A no drilling needed armrest that opens up to the cup holder area.
A decent phone holder option.

Coconuts 11-15-2012 09:06 PM
FR-S Concept rear bumper and taillights please.

http://i6.photobucket.com/albums/y21...pt-11_1035.jpg

Cade01 11-15-2012 10:24 PM
Quote:
Originally Posted by Freeman (Post 559534)
What're you able to produce at the moment?

Things that I would be interested in:
A no drilling needed armrest that opens up to the cup holder area.
A decent phone holder option.
Couldn't this be accomplished with a strong double side tape(3M) instead of the screws?

Freeman 11-15-2012 10:51 PM
Quote:
Originally Posted by Cade01 (Post 559652)
Couldn't this be accomplished with a strong double side tape(3M) instead of the screws?
Possible, but I was thinking of one side hinged so you could flip it open and use the storage area under neath. No idea if this is even possible though. Not sure if there are existing bolt holes close by to use as a mounting point.


Freeman,
Ultramarine FR-S Auto

Thank all the posts!!!!

Cade01 11-15-2012 11:35 PM
Quote:
Originally Posted by Freeman (Post 559684)
Possible, but I was thinking of one side hinged so you could flip it open and use the storage area under neath. No idea if this is even possible though. Not sure if there are existing bolt holes close by to use as a mounting point.


Freeman,
Ultramarine FR-S Auto

Thank all the posts!!!!
You could have a hinged lid even if you used an adhesive to mount it, it would just have to be strong.


All times are GMT -4. The time now is 11:46 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.