KMac Strut Tops
 

I've been working with KMac to develop camber and caster adjustable front strut tops.

We started out with 02-07 WRX tops as the bolt PCD was the same. However they'll raise the ride height about 20mm.
http://86drift.com/wp-content/flagal...xinstalled.jpg
http://86drift.com/wp-content/flagal...ac/wrxside.jpg
http://86drift.com/wp-content/flagal...stalledtop.jpg

So, to reduce this difference we moved the bearing up in the plate and the middle plate is now steel (rather than alloy) and 6mm rather than 10mm. With the standard struts there's still a ride height increase of about 10mm. So, these are really only suitable for coilovers or with lowered springs. In the end it's just under 1kg and slightly lighter than the standard top. Here are pictures of the finished top.

http://86drift.com/wp-content/flagal...wrxbearing.jpg
http://86drift.com/wp-content/flagal...c/86bottom.jpg
http://86drift.com/wp-content/flagallery/kmac/86top.jpg

If you're interested in purchasing a pair please refer to the classified section or PM me.