![]() |
CSG goes to WSIR aka "Fastest in the West" video
[ame="http://www.youtube.com/watch?v=2yik-oAVm3U"]BRZ Willow Springs International Raceway 1:38 - YouTube[/ame]
1:38.0 Stock Suspension Berk Technology Prototype exhaust Berk Technology Test Pipe Enkei RPF1 17x8 +45 Front tires: RS3 225/45/17 Rear tires: Z1 Star Spec 215/45/17 "Crash bolt" in the front Front Alignment: -1.35 camber, 1/32" total toe-out Rear Alignment: -1.40 camber, 0 toe Unfortunately, I was only able to run exactly ONE hot lap, due to Mazfest having the track for their event. I still don't trust the car 100% yet, but I think a 1:35.x is possible with the same setup; I was exiting turns 1 and 9 slower than I could have, and my turn 2 line was sloppy. The Omega could have been taken flat, as well as exiting 5, and a shorter line over 6. Next time :) |
Just ran there today. Video is uploading now. I'll start a thread, but just wanted to comment.
I was pretty surprised that it did as well as it did, and I was totally stock. |
You think you can find another 3 seconds just from driving? That'd be very neat and rewarding as a driver. In the corners you looked like you were pushing then oversteering then pushing.. you looked pretty busy on the wheel.
What did the data on the AIM SOLO say? |
Way faster then I was doing. I hit maybe 1:50.
|
1:38 is pretty damn fast with that setup Mike!!!!!
I'll be getting mine out there in November, just shooting to break 1:39.xxx |
Quote:
I also turned in hard in turn 1, forcing me to ultimately track out too much, covering additional distance that doesn't need to be covered, and scrubbing speed (not accelerating as much as needed). Turn 2 can be entered flat with the current setup, with a hard turn-in scrubbing the speed instead of lifting to enter. Turn 3 can be braked for later, and as with Turn 1, a more gradual turn-in. Turn 4 should be flat; the mild slide will naturally take the car on the right line. Turn 9... should be trail braked for the entry/setup, and less total braking. |
How is it to have wider tyre front ?
I was also thinking of such setup http://www.ft86club.com/forums/showthread.php?t=18004 |
| All times are GMT -4. The time now is 03:11 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.