BRZ Nav Bypass
 

Anyone successful in completing this? Different info floating all over and not sure which is correct.

Bypass to allow gps to be changed while driving etc... Canadian BRZ Sport-Tech. Pioneer X9310BT

i believe the harness mod that works for the avic 930bt should work for this unit...

Has anyone had any luck with this?

i'm waiting for dajoian to volunteer his BRZ for me explore...

I took my unit out to explore and looks like theres 2 plugs (White and black)

The black plug goes into the back of the unit, while the white plug is not plugged into anything at all.

I've read online to take out the yellow and black wire from the white plug and shift move it up one, and i've read to shift it to the left.

Anyone else done this yet?

See picture below

http://s12.postimage.org/ptakerib1/20121105_172231.jpg

I have finally had this done. The bypass mod was done for me by Jeff Bates @ http://www.lockdownsecuritycanada.ca/

I had to buy the RCA harness from eBay at about 50 bucks and now I can watch movies (bad idea), dial phone numbers and change locations on the GPS all while driving.

may i ask how much did they charge you?

anyone else had luck with this yet? Its so annoying can't enter an address or dial a number.

^ this

It took me a week to figure out why I couldn't type in an address while stopped (but without the e-brake on). A manual for the unit would have been nice...

Finally got around to doing this tonight since it was warmer. Tried the softmod hack and it worked great. Would be able to type in addresses while driving and phone etc.. but video playback was still a no go with the soft mod. Pulled her out and grounded one of the pins on the back and all is well now. Everything is finally functional. Didn't end up having to buy harness which was a bonus! :)

That's awesome! Do you have any pics of exactly what wires to ground and or where to put them?

Can you post a link for the softmod

There is a thread to bypass for those with the Pioneer unit. Search on here or a Google search. No need to cut wires or ground anything.