EVAP purge solenoid routing?
 

Hi all,

I'm trying to put an EVAP purge solenoid back into my frs. I know one line routes to under the intake, where does the other one go? A picture would be helpful.

The line coming out of the intake manifold is currently used to run the BOV and boost gauge. Can I Tee off this to run it back to the EVAP solenoid?

If I'm missing something please lmk, thanks in advance!

There are 3 metal pipes on the driver's side related to fueling, one of them is for the evap return. The other two are fuel feeds, 1 goes to the port injectors, and one goes to the high pressure fuel pump. If your evap has been disconnected you should have the one for the evap return sitting there without a hose connected.