Will these lug nuts work with the stock wheels?
 

I’m considering picking up a set of these so I can use them both with my Autocross wheels and the stock wheels. Anybody using these with stock wheels? Just want to make sure the conical seat is correct as I keep seeing regular cones and “bulge” type. Not sure if both are compatible or not.

https://www.jegs.com/i/Gorilla-Autom...BC-20/10002/-1

I use them on my track/autox wheels but I also have 3-1/4" ARP wheel studs.

They stick out like crazy on the stock wheels.

Thanks. Are your track wheels a different offset? Seems like they would stick out the same amount on either set. I’m planning to run spacers on my track wheels so the offset change will be behind the wheel and the lug nuts should stick out the same with or without the spacer (as I plan to take the spacer off for the street wheels).

My track wheels are 17x9 +35. They do also stick out a bit but since the studs do that already, it's not too obtrusive. On the OEM wheels, it's a good bit more obvious.

Gotta ask, what do you think these lugs will do for you that the stock ones don't?

The stock lug nuts will bottom out with longer studs.