Valve cover gasket guide?
 

Anyone know of a diy guide on the valve cover/ spark plug gaskets?


Got doo doo on the spark plugs so going to be pulling the motor and re sealing. Looking for a write up describing the process. Also I need part numbers for all the gaskets

Also re sealing timing cover because of a small leak while i have the motor out. Anything else that should be done at the same time?

I thought about doing a video guide but didn’t have time. The manual is a pretty good source.

I would pass on the timing cover if you can. Find the leak, clean and degrease, then see if you can get away with smearing some RTV over the leak. The timing cover is a PITA.