Frt stainless steel line query
 

I purchased a pair of frt HEL stainless steel brake lines but they didnt come with new banjo bolts just the washers. Am I ok the use the OEM bolts or would it be best to try and source new bolts from HEL.
Also any idea what size I would need to order please.
Thanks in advance.

I thought the banjo bolt was the fitting that is crimped to the end of the hose.

I reused the screw that secures the banjo to the caliper and the hardlines.

Sent from my Pixel 6 using Tapatalk

Re-use the banjo bolts with the supplied new crush washers. Apply the OEM spec torque which I cannot recall but know it’s very low.
Edit: just checked the online manual. 13 #/ft is the torque value.
Enjoy!

Perfect. Thank you.