Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Wheels and Tires (https://www.ft86club.com/forums/forumdisplay.php?f=62)
-   -   FS: APEX VS-5RS 17x9 +48 Anthracite wheels (https://www.ft86club.com/forums/showthread.php?t=153422)

toeout 05-25-2023 03:19 PM

FS: APEX VS-5RS 17x9 +48 Anthracite wheels
 
Sold.

Garrett86 05-25-2023 03:21 PM

Pics on car?


Sent from my iPhone using Tapatalk

toeout 05-25-2023 04:42 PM

I sold the car before I managed to take any.

Quote:

Originally Posted by Garrett86 (Post 3582129)
Pics on car?


Sent from my iPhone using Tapatalk


toeout 06-02-2023 10:11 AM

Price drop.

Wally86 06-06-2023 01:08 PM

Dang, this is a good deal.

ihavefat 06-06-2023 07:25 PM

Wish this fit 1st gen on stock shocks/springs. . It’s my understanding the higher offset is for the 2nd gen

Clipdat 06-06-2023 07:44 PM

Quote:

Originally Posted by ihavefat (Post 3583251)
Wish this fit 1st gen on stock shocks/springs. . It’s my understanding the higher offset is for the 2nd gen

Absolutely will not fit, even with 3mm spacers it will not fit.

billstock67 06-06-2023 08:52 PM

Quote:

Originally Posted by Clipdat (Post 3583253)
Absolutely will not fit, even with 3mm spacers it will not fit.


How much spacer would be required?

Clipdat 06-07-2023 02:26 AM

I ran 17x9 +42 up front with OEM spring perch, it's doable if your 245/40 tire doesn't run wide, like these A052s here do.

However, it's not ideal to run that much tire up front on a wide wheel if you can't dial in useful negative camber. With stock top hats, I couldn't do much up front (crash bolts would've just moved the wheel and tire closer to the edge of the spring perch) which kinda negated some of the benefits of having that wheel and tire setup. It still handled great, it was just leaving a lot on the table.

Ideally you'd want to run -2 degrees of camber up front with a 17x9 245/40 setup. So you're looking at aftermarket suspension bits if you want to "do it once, do it right."

toeout 06-07-2023 10:37 AM

For reference - On gen.2, I ran these wheels with coilovers and 13mm spacer up front / no spacer in the back. -4.5 deg camber front / -2.2 deg camber in the back.

toeout 06-18-2023 12:24 PM

Price drop and new pictures without tires.

Stevo22 06-18-2023 05:47 PM

Sent pm


All times are GMT -4. The time now is 08:30 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.