Pinion depth
 

What yall think run it? I was told don’t worry about centering between toe and heel. Used stock shim since it gave the best pattern so farhttps://uploads.tapatalk-cdn.com/202...24bbbca3c9.jpg
https://uploads.tapatalk-cdn.com/202...8395b63f7f.jpg
https://uploads.tapatalk-cdn.com/202...2863229f71.png


Sent from my iPhone using Tapatalk

sure seems like a lot of slop between drive/coast. is your lash within spec?

the overall pattern looks like it has good contact according to the examples you posted.

I didnt focus on backlash on that one like i shouldve so i wasnt in spec but i got it within spec at .009 thou heres the results. Im not sure if i need to make more changes i tried to make tiny adjustments but it just threw it offhttps://uploads.tapatalk-cdn.com/202...35dc5ad5fb.jpg
https://uploads.tapatalk-cdn.com/202...9b03d66b94.jpg


Sent from my iPhone using Tapatalk

That is similar to how I set my last Cobra up, the only concern is if you can handle some whine with it. Contact patch looks OK just a little tight on the pinion depth.