Bilstein B14/B16 PSS10 coilovers
 

Bilstein B14/B16 PSS10 coilovers with HVT camber Plates and Rear Raceseng top mounts. Around 5k miles on set up, coilovers are in mint shape and work as should. 1000 shipped USA! Coilovers are packaged and ready to ship!

https://i.ibb.co/hRMwKxM/DE2-BCB69-9...F7-B3582-F.jpg
https://i.ibb.co/ssmLKj7/32-D87140-E...9248773-B0.jpg
https://i.ibb.co/Qd4ggcN/8-C77-C567-...CE4545-DB2.jpg

I literally just bought these lol. Mind telling me how was the installation process? How much is the drop with factory settings? Did you require camber bolts and RLCAs?

I have a set of these in a box right now. They were taken off my old car which also used Raceseng CasCam plates. Would it be helpful to share a picture of my car with them installed so you can see the ride height? I could then go count the threads showing on them.

It would absolutely help, thank you. Did you install the camcam plates at the same time with the coilovers or was it an incorporation later on. So far I've found one video installation on a BRZ and it looks like the poster used all OEM equipment. I've read in different post that the overall drop is about 1-1.5 in which technically should be okay with alignment. Just want to cover my bases before ordering camber bolts and RLCAs.

I installed the CasCam plates at the same time.
What size wheels will you be using?
What ride height are you going for? Mine was 1 to 1.5" lower than stock I think.

These wheels are ARC-8s 17x9 ET35. Camber in the picture is probably about 2.2* all around.

https://www.ft86club.com/forums/pict...ictureid=12815

And here are the spring perch settings from that picture:

https://www.ft86club.com/forums/pict...ictureid=13091

If you want more pictures, check out https://rockymountain86.com/ and look for car #979
Oh, and I had OEM mounts in the rear.

You can totally return them and buy mine! You’d definitely save a few dollars doing so too! Food for thought!

Sold close