SOLD Stoptech Front 355mm / Rear 345mm BBKs
 

SOLD

Swapped to 17" wheels and PP brakes for tire choice and classing reasons so I am selling my old BBK as the front kit won't fit under basically any off the shelf 17" wheel.

I've test fit the rear 345 under a 17x9 +35 TC105 and 17x9.5 EC7R, both have clearance for days so I am guessing it'd fit nearly any PP clearing 17" wheel.

Pads are CSG C2 with a significant amount of pad depth left front and rear. Rotors are good and have the usual surface cracking, no lip, etc. I very strongly recommend getting new brake lines, but they are included. All required bolts are included too.

They calipers are difficult to clean without damaging the paint so I didn't try real hard as soon as I realized simple green and brake cleaner were corrosive to it. The black marks on the front calipers are from tire rubber getting stuck between the wheel/caliper on track. Two dust boots in one of the front calipers got a bit crispy and are cracked/torn.

Piston sizes are 38mm / 34mm front and 38mm rear

Dust boots:
https://www.zeckhausen.com/catalog/p...roducts_id=422

https://www.zeckhausen.com/catalog/p...roducts_id=210

Asking Prices
Front Kit: $x
Rear Kit: $x
Both Kits: $x

With respect to shipping - it'd be roughly 115lb and 36" x 16" x 16" for both kits in one box. Might be cheaper / easier to separate into two boxes.

https://i.imgur.com/di0Xxd8.jpg
https://i.imgur.com/PMASTXR.jpg
https://i.imgur.com/t31ctA2.jpg
https://i.imgur.com/u83g8tX.jpg
https://i.imgur.com/l8Tx5FW.jpg
https://i.imgur.com/todYjA7.jpg
https://i.imgur.com/ECKAhfb.jpg
https://i.imgur.com/yx74KBX.jpg
https://i.imgur.com/2QZf70I.jpg
https://i.imgur.com/3THyYRs.jpg
https://i.imgur.com/Xj1SWaL.jpg
https://i.imgur.com/e5MHmlL.jpg
https://i.imgur.com/1ORzSrl.jpg
https://i.imgur.com/WlYw90r.jpg
https://i.imgur.com/H8wGQLH.jpg
https://i.imgur.com/5h4Q20b.jpg
https://i.imgur.com/la7Ojpm.jpg
https://i.imgur.com/IGeBgkK.jpg
https://i.imgur.com/COzx2Kl.jpg
https://i.imgur.com/HDmJk6f.jpg
https://i.imgur.com/Yy9gGxg.jpg
https://i.imgur.com/KlJonZK.jpg
https://i.imgur.com/U4vL8Cd.jpg
https://i.imgur.com/ZvBnZqD.jpg
https://i.imgur.com/FZVOOaa.jpg
https://i.imgur.com/IdX2FQF.jpg
https://i.imgur.com/U4msV5Z.jpg
https://i.imgur.com/FjREmZx.jpg
https://i.imgur.com/aGHoxlF.jpg

Anyone want these things? Make me an offer

Price drop

I want this so bad, but getting this means getting a new set of wheels and tires as well. $$$

For track duty or hardparker?

this is such a good deal. You're not going to find a better BBK for this price. The C2 pads are superb as well.

https://i.imgur.com/28C1FQW.jpg

Both. Mostly concerned about winter. My summer wheels and tires can clear this kit. But winter oem wheels can’t.

Yeah, the 18" constraint is hard to stomach but it is a great kit. There are SOME 17" wheels that fit, but usually they require the combination of the right spacers to move the wheel barrel widest spot relative to the caliper.

This is behind my 17x9.5 EC7R without any spacers, would probably BARELY clear with the right spacer size... but it'd also really not end well if you ovaled a wheel lol.

https://i.imgur.com/TQfWoQU.jpg
https://i.imgur.com/gx09hdK.jpg

Sold