GR86 Solo2DL - Wiring and DBC File
 

Just picked up a Solo2DL (with CAN Cable). There are instructions provided by AIM that indicate which pins to tap on OBD2 and a file in RaceStuido but I had read some posts here that the file isn't correct.

I think a few people here have this setup, can anyone chime in with some suggestions for wiring preferably so I don't need to cut factory harness.

I don't believe you can get can data on the obd2 plug in the gen2 86. You'll need to pull it from some other place on the can network. The most common place is the noise generator ECU. Ansix auto makes a adapter:
https://ansixauto.com/2022-brz-gt86-can-adapter/
Or you can make your own.

Thanks!

Anyone have the DBC files, maybe @CSG Mike