Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Tracking / Autocross / HPDE / Drifting (https://www.ft86club.com/forums/forumdisplay.php?f=39)
-   -   E85 Fuel Starvation Mod (https://www.ft86club.com/forums/showthread.php?t=150889)

jacobe38 08-17-2022 03:56 PM

E85 Fuel Starvation Mod
 
Hello all,

I made a video to share my fuel starvation mod, hope this helps someone. https://youtu.be/2AJNldchtbk

Like many of us I experienced pretty bad E85 fuel starvation on track, Verus Fuel door wasn't enough, and I wasn't ready to take the plunge on a surge tank. So I decided to try and look into the lifter pump solution.

While I was researching how to go about this, I couldn't find any write ups or guides like you usually can for just about anything you'd ever want to do to a car, and it slowed me down. So I decided if I was able to get it working I would try and make one to help people out.


Pasting video description:
Quote:

This video goes over how I modified my fuel system to greatly reduce fuel starvation while running E85 at the track by installing a secondary fuel pump in the passenger side of the fuel tank.

It was successful but not perfect. I still fuel starve at 1/2 tank. But prior to this, I couldn't even do 5 laps without fuel starving despite going out with a 100% full tank. So for me it was hugely successful and enables me to use E85 when I effectively could not before. Your experience may vary.

I installed the Verus Fuel Door while I was NA and it helped a little bit but once I went FI it wasn't enough. I'm not ready to take the plunge on a surge tank and all that those entail, not to mention the cost. For about $100 and topping off between sessions I am very happy with this solution! I've done 5 track days now with this setup and so far so good. I'll come back and edit this if that changes.

Things I bought:

Submersible Rubber Fuel Hose, 8mm ID for the pump I chose. I got two feet and trimmed a little.
http://www.radiumauto.com/Submersibl...Hose-P831.aspx

Hose Clamps, (18-0031). You could probably use whatever, but I liked this design
http://www.radiumauto.com/Hose-Clamps-P894.aspx

Fuel Pump. I liked this for the low current draw, price, and size. It's also designed for this application.
https://deatschwerks.com/products/9-110-1055

Video of me fuel starving on track:
https://youtu.be/jmL6LF5mFDM

Feedback and ideas for improvement welcome!

NoHaveMSG 08-17-2022 08:46 PM

:clap:

Probably adaquite for us that are NA. Nicely done.

jacobe38 08-17-2022 10:33 PM

Quote:

Originally Posted by NoHaveMSG (Post 3542163)
:clap:

Probably adaquite for us that are NA. Nicely done.

I agree, and thanks!

jflogerzi 08-17-2022 10:55 PM

Booked marked and will be looking at this in the future

Sent from my Pixel 6 using Tapatalk


All times are GMT -4. The time now is 11:49 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.