gen2 parts for oil change?
 

Anybody know the part numbers for the oil filter, crush washer, drain plug for GR86? Also, anybody have torque numbers for the filter assembly and drain plug?

Filter and gaskets are the same as 13+ models. Both BRZ/86. You can find oil change kits at FTSpeed and 86Speed.



Im not completely sure on torque specs though I can only assume is about the same as first gens.



Get a fumoto valve, if you can, if compatible.

The '22 filters are different. It has gone to the WRX filter now. I think it is the 170 vs the 130.

Good to know, FTSpeed has their oil package with the 13-20 filter included.

In the grand scheme of things either filter is likely fine, until you have an engine warranty issue and they try to be ****s because you used the wrong number filter.

This is true. I went to Subaru Parts of America and did a little more digging.



Correction to my previous response.

Oil Filter Part Number: 15208AA170
Crush Washer:803916010 (There's different ones listed)
Torque: 28.9 Ft/Lbs (Or whenever is nice and snug if you don't have a torque wrench)


Don't need to replace the plug every time, just try not to damage it. (17007AA010)

Fumoto Valves: F-108, F-108N, F-108S, F-108SX