Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Brakes, Suspension, Chassis (https://www.ft86club.com/forums/forumdisplay.php?f=63)
-   -   SOLD (https://www.ft86club.com/forums/showthread.php?t=146384)

AxisPower 08-04-2021 11:04 PM
SOLD
 
SOLD

AxisPower 09-05-2021 11:48 PM
Bump. OBO

AxisPower 10-22-2021 01:23 AM
Bump. Lowering price.

AxisPower 12-28-2021 11:48 AM
bump

ojuniour 01-11-2022 08:37 PM
5k? especially for used? Bruuh ��*��
Start at 3k and I guarantee you this thread will be crowded.

GabeoHuncho 01-11-2022 09:10 PM
Correct me if I’m wrong, but a standard Brembo 6/4 pot is gonna be more than this new, and the TRD surely makes it more valuable?

norcalpb 01-12-2022 01:19 AM
Quote:
Originally Posted by GabeoHuncho (Post 3495899)
Correct me if I’m wrong, but a standard Brembo 6/4 pot is gonna be more than this new, and the TRD surely makes it more valuable?
I believe the US big brakes are 4 pot front 2 pot rear

Bergycheese348 01-12-2022 10:38 AM
Quote:
Originally Posted by ojuniour (Post 3495882)
5k? especially for used? Bruuh ��*��
Start at 3k and I guarantee you this thread will be crowded.
The normal PP Brembos would be around 3k, but these are the Monoblock brake kit Brembos, which are a lot more powerful and have a ton more stopping force than the PP Brembos. This type of Brembo was originally used on the Griffon Concept. These were only sold in Japan, and this is a good price used since they go for at least $5,500 plus shipping and import taxes most of the time. GLWS OP

ojuniour 01-12-2022 02:04 PM
Quote:
Originally Posted by Bergycheese348 (Post 3496027)
The normal PP Brembos would be around 3k, but these are the Monoblock brake kit Brembos, which are a lot more powerful and have a ton more stopping force than the PP Brembos. This type of Brembo was originally used on the Griffon Concept. These were only sold in Japan, and this is a good price used since they go for at least $5,500 plus shipping and import taxes most of the time. GLWS OP
Aahh didn't know very much. With how light the wins are, unless you are running some ridiculous amount of power ..all built up, then I can totally see the value no doubt.

Bergycheese348 01-12-2022 02:25 PM
Quote:
Originally Posted by ojuniour (Post 3496081)
Aahh didn't know very much. With how light the wins are, unless you are running some ridiculous amount of power ..all built up, then I can totally see the value no doubt.
Its not about how light a car is to use a type of brake like this, its all about resisting heat and dispersing it. If you are driving your car only on the street, the absolute most you will need is upgraded pads. If you are on a track and needing to brake hard and a lot, no matter the weight, you need to resist heat and disperse it to make sure you don't have brake fade. The TRD Griffon used this, and that weighed under 2300 pounds and had stock power...

ryuusei 01-25-2022 09:03 PM
Definitely want. Keeping an eye on this.

ozafar 02-08-2022 07:37 PM
I am interested. Sent PM

AxisPower 04-19-2022 09:34 PM
bump

Gregorio3 07-24-2022 11:42 PM
Interested in buying these


All times are GMT -4. The time now is 10:47 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.