RPM NEEDLE NOT WORKING & U0100 + U0122 CODES
 

After following exactly the instructions for the installation of the magna gauge face on an automatic 2019 GT86, I started up the car and the needles were all misaligned, even though I did not move them at all and reinstalled them exactly the same. Whatever I did triggered the U0100 & U0122 codes and the RPM needle does not work, along with a hesitant startup + car dies. Moving the other needles back into place gets them to read correctly, but the RPM needle does not work at all. Thanks for any help guys

I should also add that I tried disconnecting the battery in an attempt to reset it with no luck.

Maybe you should undo what you did.

Sent from my SM-G975U using Tapatalk

codes are for loss of communication. check plugs and confirm proper part numbers.

the magna gauge face cluster is literally just a piece of paper that swaps out the OEM one for a different look. It is purely an aesthetic mod. The removal of the needles in the cluster was required to fit it and reinstallation was what misaligned the needle. Now I am not sure how to find the point to realign the needles