Subaru Brz Wont start
 

hey so im having some trouble with my brz and was wondering if anyone else has the same problem. After doing a couple donuts my car dies out and throws a u0100 code. When it happen in the past i would have to depress the clutch and the car would burble and sound as if its dieing but then it would come back. This time my car wont start at all and i still have the same code. Anybody can help me out please?

Sounds like what happened with my BRZ a few weeks ago. Except I attempted to start the car while both mufflers were covered in a snow bank. After continuously trying to turn the car over. It wouldn't go. Turns out I flooded the engine. Didn't get any codes just the no start. Pulled the plugs and cleaned them up. All good to go now.

Sent from my LM-G900 using Tapatalk

Hello decalls and welcome to our forum. - :clap:

First off, stop doing donuts - :slap: - it's hard on your car.

Second off, check out this reference:

https://www.solopcms.com/blog/common...0100-code-fix/

Third off, wait for someone to come along that knows what they are talking about to help you out - ;)

You make that sound easy - :confused0068: have you had an engine transplant? - :D

u0100 is a loss of communication. i would check your grounds, as well as fuses.

are there any mods to the car?

An you decided that continuing to do the thing was a good idea...:slap:

Do you mean the engine won't turn over ...... or ..... won't fire?

Is your battery low?

have you checked the planetary alignment?

Is Mercury in retrograde?


Sent from my iPhone using Tapatalk

OP did not provide enough detail...he failed to mention the condition of his car after the donuts..found his car on his FB page..

https://cs.copart.com/v1/AUTH_svc.pd...8d17402f89.JPG

surprised it only has one code..

for a second there, i thought the tire was on fire.

Seems like I remember reading something about fuel starvation from the design of the fuel tank during extreme lateral Gs. There's an insert you can install that prevents it.

That wouldn't cause the U0100, but it might explain why it quit. You could have multiple things going on.