Idle table logic?
 

So I'm learning to fiddle around with logging via OFT and exploring the tables in RomRaider a bit. One thing I had a had a mind to try was bump the warm idle a bit to see if it smooths out. Thing is, there are like... 10 idle tables.

Anybody have any idea what triggers the ECU to reference which table? I might be able to make more informed adjustments that way.

make them all the same

I was about to do that, but surely there's some reason for all of these tables, and the differences in them?

All mine are the same :iono:

we don't know,different requirements for each one to activate or possibly residues of older generations of calibrations.... just put all the same and don t think about it

I was curious also! I set mine the same on my e85 tune and upped cold start rpm`s . Plus upped fuel on cold start V4.03 maps. Nice and stable now.

Your probably right, I was never able to find a def on what is what. Based on other tables I would think that "B" is the standard table but :iono:
My car, a 13', using a tune based off an OFT 2.7 rev only has idle tables going to "F". OP has 3 extra tables.

You change all the values that are 650 through 800 to whatever you want the idle to be set at.