Spoiler / wickerbill
 

Well, I believe I've come to the point in my tracking adventure that I am researching aero: adding a splitter and spoiler (not a wing) and maybe rear diffuser.

Looking for others'experiences, recommendations, warnings, etc.

Planning on making the splitter.

Looking for a spoiler just large enough to be able to add an adjustable strip to it's rear surface.

MY14 BRZ

Sent from my moto g power using Tapatalk

Here are a couple I like:

https://i.frog.ink/k0Xat1bp/ast-sfrs...=1533424336.33

https://86speed.com/images/thumbs/w_...continued.jpeg

https://ffperformance.co/wp-content/...ker-Bill-3.jpg

norcalpb
Thanks.
The first looks too narrow. What's the second one? I like the last two.

Sent from my moto g power using Tapatalk

Second one is Perrin.

Verus was nice enough to do some virtual air flow testing on it:

https://www.verus-engineering.com/bl...ap-analysis-31

I’m iffy on it because it may produce a ton of drag at high speed, which our little engines don’t like. But real world application can always differ.

norcalpb
Not the Perrin unit, it mounts on the OE spoiler. I will remove my OE spoiler.

Sent from my moto g power using Tapatalk

norcalpb
I can't find the second one (no name or logo) as Perrin. Would it mount directly on the back of the trunk lid?

Sent from my moto g power using Tapatalk

The Perrin unit that mounts on the OE spoiler is listed as DISCONTINUED on 86speed website.

Sent from my moto g power using Tapatalk

Well would you look at that, it is finally a discontinued product. And no I don't think it would fit without the stock spoiler like it is intended to be.

You can also try your hand in making your own, similar to this:

https://www.good-win-racing.com/imag...85/61-2833.jpg

norcalpb
I think I'll look for a low profile unit to mount on the lid that will allow me to add a strip to it's back

Sent from my moto g power using Tapatalk

949 Racing project car:
https://www.ft86club.com/forums/atta...1&d=1605916907

Why are you so against adding a rear wing element?

Spoilers like the 949Racing car result in a high drag effect as a results of a massive wake zone immediately behind the element itself.

My Versus front splitter + UCW Rear Wing at 6* AOA resulted in 2 mph less VMax at Mid-Ohio (122 vs 120 mph) into China Beach and still was ~1.5 seconds faster on the same tire same conditions.

You just made me realize that an adjustable rear wing could be moved to a lower drag config for the drive home because mpg because I'm driving this car Monday morning too...

Right, when I tow my car I throw my wing back to 0 AOA. I haven't really noticed any MPG hit on the towing aspect. DDing around back and forth to work (35 mph roads 10 miles total) I still get 28-29 MPG. Nothing abnormal.

Those type of spoilers do great at low speed (think all Street Prepared style classes). Anything above 60+ you're going to see a massive negative impact

The drag from it is not bad. I have had one for years.

That is what I am planning to do with my GTC200. The drag from it is bad at minimum AOA. Going to build custom mounts with more adjustment.