Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Bolt-Ons (https://www.ft86club.com/forums/forumdisplay.php?f=60)
-   -   FS: Ace A350 w/ CSG Double Ceramic Coating (https://www.ft86club.com/forums/showthread.php?t=143047)

mistople 11-05-2020 06:18 PM

FS: Ace A350 w/ CSG Double Ceramic Coating
 
Hi everyone,

I'm parting with a much-loved A350 with the inside & outside ceramic coating from Counterspace Garage.

Including a brand new hardware kit which provides you with all of the gaskets and hardware for the header to overpipe connection.

I noticed a small weld crack after removing it from the car, hence the lowered price. I think it could be fixed quite easily by someone handier than myself.

There is some wear on the outside coating from both rubbing on the skid plate (a known issue with this header) and just regular install wear.

Don't mind the spots—it was raining when I took the photos :)

$1200 OBO + shipping.

https://i.imgur.com/C0qFpK9.jpg

https://i.imgur.com/qzZq6Yt.jpg

https://i.imgur.com/Syq6poU.jpg

https://i.imgur.com/7vz8uqj.jpg

http://i.imgur.com/ridwdJq.jpg

https://i.imgur.com/GJsbPk6.jpg

bhmax 11-07-2020 09:12 PM

I really like my Ace! I had mine get a few cracks that look just like that. I wonder if Ace were to weld completely around if it might solve the issue from the get go. I had a local place fix it up for me.

mistople 11-09-2020 04:49 PM

Quote:

Originally Posted by bhmax (Post 3381455)
I really like my Ace! I had mine get a few cracks that look just like that. I wonder if Ace were to weld completely around if it might solve the issue from the get go. I had a local place fix it up for me.

That was my plan as well. But since I'm parting out the car, I figured the next owner would prefer to choose their own shop if they want to fix it.

ka-t_240 11-11-2020 12:16 PM

Doesn't ACE have a 5 year warranty? If the header is not that old, I would reach out to them and see if they will cover this.


Looks like the crack is from the weld, and into the flange, correct?

bhmax 11-11-2020 01:19 PM

Quote:

Originally Posted by ka-t_240 (Post 3382342)
Doesn't ACE have a 5 year warranty? If the header is not that old, I would reach out to them and see if they will cover this.


Looks like the crack is from the weld, and into the flange, correct?

I tried that myself. Contacted CSG and they said they forwarded my pics to Ace. I never heard back, but didn’t contact Ace directly. Just wanted it fixed so I got it done locally.

ka-t_240 11-11-2020 03:28 PM

Quote:

Originally Posted by bhmax (Post 3382364)
I tried that myself. Contacted CSG and they said they forwarded my pics to Ace. I never heard back, but didn’t contact Ace directly. Just wanted it fixed so I got it done locally.

Ya - the crack from the runner into the flange is what scares me about fixing it. Cracked weld no problem IMO. That's why I suggested Warranty, which this likely should be warrantied thru ace, especially since they likely will only warranty to the original buyer.

mistople 11-11-2020 05:21 PM

Paging @CSG Mike for his thoughts

CSG Mike 11-11-2020 05:41 PM

Ace updated their flange design this year after observing a few cracks.

Getting the area cleaned and repaired locally should be totally fine.

Also, FYI, that overpipe ceramic would be covered under lifetime warranty to the first owner. It's cosmetic flaking (as indicated by the ceramic revealed underneath, rather than steel), but covered regardless.

ichitaka05 11-12-2020 01:28 PM

Please follow the Member Classified Rules (#2) or I'll delete the thread.

Quote:

2. You must post AT LEAST ONE picture of the item(s) for sale with a sign included in the photo. On the sign, should be your username, date and the words FT86Club.com on it. It can be handwritten or printed on a piece of paper. No photoshopped signs will be accepted.
Thanks,

ichi

mistople 11-14-2020 04:14 PM

Quote:

Originally Posted by ichitaka05 (Post 3382640)
Please follow the Member Classified Rules (#2) or I'll delete the thread.



Thanks,

ichi

Sorry, added the image back to the original post. Must've accidentally removed it.

RuyGuy2 11-20-2020 11:49 PM

Quote:

Originally Posted by mistople (Post 3380957)
Hi everyone,

I'm parting with a much-loved A350 with the inside & outside ceramic coating from Counterspace Garage.

Including a brand new hardware kit which provides you with all of the gaskets and hardware for the header to overpipe connection.

I noticed a small weld crack after removing it from the car, hence the lowered price. I think it could be fixed quite easily by someone handier than myself.

There is some wear on the outside coating from both rubbing on the skid plate (a known issue with this header) and just regular install wear.

Don't mind the spots—it was raining when I took the photos :)

$1200 OBO + shipping.

I have PM'd you.

RuyGuy2 11-21-2020 03:49 PM

is this still for sale?

mistople 11-23-2020 05:25 PM

Quote:

Originally Posted by RuyGuy2 (Post 3386110)
is this still for sale?

Yep. Replied to your PM.


All times are GMT -4. The time now is 02:19 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.