Originally Posted by yzf219 (Post 3379878)

Hello, wondering if anyone can provide insight to the following issue im having. I am trying to use ECUTEK to flash an OFT Stage 2+ working on my car which has the cal id ZA1JA00C. Obviously I can't just flash the OFT map directly. So I was using a stock ZA1JB01C ROM and copying the tables from the OFT STG2+ map which has the cal id ZA1JA01G cal id to the B01C ROM.

Everything was going fine until I get to the 'Exhaust cam retard angle base AVCS' and 'Intake Cam Advance Angle AVCS' tables for some reason when I copy tables for the exhaust AVCS it completely messes up the values for the intake AVCS and vice versa. I am using ECUFLASH to do this.

Thanks in advance.

Sent from my SM-G950W using Tapatalk

Originally Posted by steve99 (Post 3379897)

Its likely there is a slight mismatch between the A01G defs and the B01C defs




you could try using romraider



but the A01G rom is compatable with B01C so might be easier jist to ise A01G