Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Jackson Racing NA Oil Cooler (https://www.ft86club.com/forums/showthread.php?t=140482)

jmai 05-21-2020 04:56 AM
Jackson Racing NA Oil Cooler
 
So I ended buying a used JR NA oil cooler and was wondering if there was suppose to be any included hardware that mounts the bracket to the bumper or does it just reuse the oem bolts on the bumper.

CSG Mike 05-21-2020 06:14 PM
It mounts onto your impact beam.

Joon525 05-21-2020 07:30 PM
He's asking if the NA oil cooler is supposed to come with hardware....
@jmai this is a link to the installation manual.
https://jacksonracing.com/pdf/instru...anual_rev2.pdf
The bottom of page 2 states
Quote:
Part Numbers will be listed throughout the installation instructions in parentheses.
(1234-56-789) or (12345-67890)
An example is in the middle of page 8.
Quote:
22. On the driver side of the front bumper support you will find an open mounting hole with no
threads that is approximately 23” from the stud mounting location. Reach in through the opening
in the front bumper support and install a M6x1.0x25mm flanged bolt (91100-06025) with a M6
fender washer down through this mounting hole
So yes, I would assume this unit came with hardware.

jmai 05-21-2020 10:50 PM
Quote:
Originally Posted by CSG Mike (Post 3333494)
It mounts onto your impact beam.
Sorry I meant the hardware to mount onto the impact beam. Doesn’t seem like the person I bought it from had hardware to mount it or does it uses bolts that already exist on the impact beam

jmai 05-21-2020 10:51 PM
Quote:
Originally Posted by Joon525 (Post 3333515)
He's asking if the NA oil cooler is supposed to come with hardware....
@jmai this is a link to the installation manual.
https://jacksonracing.com/pdf/instru...anual_rev2.pdf
The bottom of page 2 states


An example is in the middle of page 8.


So yes, I would assume this unit came with hardware.
That’s what I was curious about, but doesn’t seem like it shows any hardware on the website images

Joon525 05-22-2020 10:42 AM
Quote:
Originally Posted by jmai (Post 3333559)
That’s what I was curious about, but doesn’t seem like it shows any hardware on the website images
Even though the pictures don't show hardware it doesn't mean it's not required. No one should expect the core to mount itself by means of magic. The pictures are just for marketing purposes. So...
  • Read the manual I linked you to and buy the same hardware at a local store.
  • Contact Jackson Racing and see if you can buy the hardware from them.
  • Contact the guy you bought it from and ask if they have the hardware.

CSG Mike 05-22-2020 02:04 PM
Quote:
Originally Posted by jmai (Post 3333557)
Sorry I meant the hardware to mount onto the impact beam. Doesn’t seem like the person I bought it from had hardware to mount it or does it uses bolts that already exist on the impact beam
Used items are rarely complete. You'll need to source replacement hardware. If the uninstall was incomplete, then I would recommend carefully inspecting the rest of your used oil cooler.


All times are GMT -4. The time now is 07:39 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.