Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Oxygen Sensors (https://www.ft86club.com/forums/showthread.php?t=140454)

Jwheelz 05-19-2020 05:15 PM
Oxygen Sensors
 
Hello, first post. I have a 2013 Scion FRS and I recently had a motor swap. The engine has been running really rough and is currently running rich with a bunch of smoke burning out the exhaust. I suspect the problem is coming from the Oxygen sensors, but I need to know what the proper voltage specifications are for the Oxygen sensors? Does anyone know this info? Thanks.

NoHaveMSG 05-19-2020 06:57 PM
The O2 and MAF operate in a voltage range. The only way to really test them is resistance across the pins at a specific temperature.

https://demos.starbase7.net/t3Portal..._rm_index.html

Look under Engine/Hybrid System -> FA20 Engine Control and the inspection procedure for the Air fuel ratio sensor and the heated oxygen sensor.

I doubt this is your issue though.

Jwheelz 05-19-2020 08:54 PM
Quote:
Originally Posted by NoHaveMSG (Post 3332829)
The O2 and MAF operate in a voltage range. The only way to really test them is resistance across the pins at a specific temperature.

https://demos.starbase7.net/t3Portal..._rm_index.html

Look under Engine/Hybrid System -> FA20 Engine Control and the inspection procedure for the Air fuel ratio sensor and the heated oxygen sensor.

I doubt this is your issue though.
Thank you NoHaveMSG! I found what I needed under air-fuel ratio sensor inspection.


All times are GMT -4. The time now is 05:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.