Help needed with Smartkey customization (2016 model)
 

So..



When if I press the "lock" and "unlock" button of my smartkey for 10 seconds, it chirps twice and beeps from the outside once. If I continue holding down the two buttons (without letting it go from the first place), then after 10 seconds I hear two chirps and two beeps from the outside. If I continue holding down even longer it will cycle though 1 beep and 2 beeps.



I know some setting is cycling through but I have no idea what is changing. It is not the passenger unlock setting for sure.



Does anyone know what this could be changing??


Also, I hear 2 different stories about "autolock" when you leave the car. Does it lock automatically or no?


Lastly, was there any more hidden feature found besides what is listed here?


https://www.ft86club.com/forums/atta...1&d=1347512289


Any advice will help.

I try searching the forum before asking but its kinda hard to sniff through all the threads.


Thanks :thanks:

No idea what you are cycling but it is probably the items found on page 373 of the OWNER MANUAL

The "auto lock system only is if you unlock a door with a remote but don't actually open it. It does not autolock after leaving the car for 60 seconds.

If you don't have an owner manual here it is. Read and discover a whole bunch of things.

https://www.toyota.com/t3Portal/docu...f/OM18056U.pdf

Thanks for the input.


I read the owner's manual back 2 back and yes I feel like you are maybe right but I just can't tell which one is cycling..



Anyone else know what is happening?

bumpee

nvmnd. figured it out.

it cycles the option to unlock passenger door when proximity is triggered.