Cusco Rear LCA
 

Hoping someone here can help, I have tried searching but failed to find anything.

I have some Cusco rear LCA's installed and after a few years the pillow ball's have worn enough that there's some play.

Does anyone know the correct size of pillow ball's for the Cusco arms?

https://sp.apolloboxassets.com/vendo...uW9Array_2.jpg

Sent from my SM-G975U using Tapatalk

I'd contact the UK Cusco dealer, coordsport first, then Cusco USA second, or maybe CSG can get you specs/replacements.

https://www.cusco.co.jp/en/distributor/

I would contact Cusco UK.

But you can also measure what you have. Detailed dimensions are all available on the rod end sites so you can compare fairly easily. Or see if a place like www.mcgillmotorsport.com can help you (no personal experience, there are plenty of other options in the UK).

I have a set off the car, but they're in storage and not at my house. When the time comes I'll measure and replace them on my own.

EDIT: sorry, one note is that the rubber boots will be absolute misery to get off without a special tool. that would make things a little more complicated.

- Andrew

Thanks @Strat61 and racecomp. I have emailed Cusco, but not heard backs thought I'd ask here incase anyone has had to change them already.

As racecomp mentioned the rubber boot will make it a pain to measure without stripping off the car.

Will see if coordsport can help.

Got a reply from Cusco JP, they use HRT18E NMB end's for anyone else that might need some.

http://bearingsize.info/catalogue-on...obj143330.html