|
Splash 540S steering hub problem?
1 Attachment(s)
I just installed a splash 540S steering wheel hub and I am a bit confused. I tried feeding the clock spring wiring through the hole and I can’t put the hub through the spline. I saw the NRG short hub requires you to tuck the wiring behind the hub.
I did this with the splash hub and everything seems fine, I am not sure if it will mess up the clock spring in the long run though. This should be ok right? I also am getting an indent with the harness plug through the black cover. I have the same hub with my 350z and everything went super smooth, I had trouble with the FRS though. |
| All times are GMT -4. The time now is 07:43 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by
Advanced User Tagging v3.3.0 (Lite) -
vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.