Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Cosmetic Modification (Interior/Exterior/Lighting) (https://www.ft86club.com/forums/forumdisplay.php?f=36)
-   -   What is this part on my bumper???? (https://www.ft86club.com/forums/showthread.php?t=139946)

c_alex 04-19-2020 11:11 PM

What is this part on my bumper????
 
1 Attachment(s)
I'm trying to take the bumper off my 2015 Subaru BRZ and found this cover thing on it that is preventing me from taking it off (I don't want to go ape and rip it off destroying it). I searched on Subaru's parts and nothing is there and I've only seen this on some bumpers. I think it is the sensor for the headlights but I could be wrong.

JCC 04-19-2020 11:20 PM

not a tow hook cover, right? (me too lazy to go outside and look at my car)

Sent from my SM-N950U using Tapatalk

c_alex 04-19-2020 11:31 PM

No I don't think it is a tow hook cover I have one on the plastic part of the bumper

Kiske 04-19-2020 11:59 PM

Its for euro spec cars with headlight washers/squirters.


https://m.youtube.com/watch?v=Fg5C6Dkx0ks

beltax90 04-20-2020 12:13 AM

pez dispenser

c_alex 04-20-2020 07:17 AM

How would I remove this (do I need to disconnect a cable or pull it off etc...)?

Opie 04-20-2020 10:27 AM

It's a headlight washer...not sure how it is removed. I would remove the wheel and pull the fender liner to get a look at it.

sneaky_pete 04-23-2020 10:17 AM

Headlight washer. If you get your fingernails under them you might be able to pull them out far enough to remove the fluid hose that attaches to the back of them. they are spring loaded - in there firmly, pull them straight towards you and don't twist them like you have done in your photo. might have to leave them until you remove the bumper to get your hand behind there to remove them before taking the bumper off completely.

these covers are known to fly away, probably when the washers are used at highway speed. I have disconnected mine for this reason - on the passenger side (RHD vehicle) you can remove the plastic cover on the bottom side of the front part of the bumper (the cover in front of the aluminium sump cover). you will see the bottom of the washer reservoir under the passenger side headlight. remove the cable to the pump on the very bottom on the washer bottle and tape up both ends to stop dust getting in there. the washer bottle has two motors - one for the windscreen (higher up) and one for the headlights (the lower one). the headlight washer only works when the headlights are on and the windscreen washer is activated.

No warning lights or anything following disconnection.


All times are GMT -4. The time now is 10:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.