Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Bolt-Ons (https://www.ft86club.com/forums/forumdisplay.php?f=60)
-   -   KraftWerks c30 supercharger kit $1000 (https://www.ft86club.com/forums/showthread.php?t=139606)

captain awesome 03-28-2020 12:22 PM

KraftWerks c30 supercharger kit $1000
 
SOLD



The Rotrex unit is locked up. I can still spin it, but it takes force that shouldn't be required. I don't feel like getting it rebuilt so I went back to an NA setup. There are a couple reputable places to get it rebuilt for ~$700 and up depending on what all needs replaced.



I bought the kit used and ran it about 800 miles. After some work getting a belt alignment sorted, it was putting out good power. In fact on 91 pump gas I was running out of stock injectors around 7200 rpm. I bought a bunch of parts to switch to e85 but the Rotrex unit called it quits a few days before my planned upgrades.



This is including a 30mm belt track upgrade kit that has only 800 miles. One of the pulleys touched the oil filter housing when I was messing with belt alignment. It's purely cosmetic though and bearings are in good shape. This has a brand new spare belt and the belt with only 800 miles. Also included is a half quart of Rotrex oil. All hardware was upgraded with stainless fasteners or the best available with a proper corrosion resistant coating.



The blow off valve or diverter valve is a Tial QRJ unit with the proper pink 1.5 spring specific to supercharger applications.


The air filter was cleaned thoroughly and recharged with a K&N kit.


Omni 3 bar map sensor.



Also I have the 20mm belt kit that came with it, and all the associated brackets. It's got a high boost pulley and a new belt. One of the pulleys could use a new bearing, and it's a simple off the shelf item that could easily be replaced. I honestly think the 20mm belt would have been fine for my use if it had the standard boost pulley.


Anyway, that about covers it.



https://live.staticflickr.com/65535/...7509d4c6_h.jpgUntitled by hatchethairy, on Flickr


https://live.staticflickr.com/65535/...411c9321_h.jpgUntitled by hatchethairy, on Flickr


https://live.staticflickr.com/65535/...b9e12e71_h.jpgUntitled by hatchethairy, on Flickr


This is the box of 20mm stuff.


https://live.staticflickr.com/65535/...b372d417_h.jpgUntitled by hatchethairy, on Flickr


All times are GMT -4. The time now is 10:13 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.