Megan Racing Inner tie rods install /vid
 

I installed some Megan Racing inner tie rods in my 86.
So i made a video.
So hopefully it makes it easier for someone else doing it.
It is pretty much the same process replacing with the OEM rods
It is not overly hard if you plan ahead.
[ame="https://www.youtube.com/watch?v=vKryb9Om0Rc&t=439s"]https://www.youtube.com/watch?v=vKryb9Om0Rc&t=439s[/ame]

Worth noting that wheel rubbing with greater max turning angle possible, and that one should plan in some angle limiting washers/spacers (which will rob a bit meaning from changing out these tie rods), or wheel spacers, and in later case, depending on thickness and eg. slip on spacer type, also longer wheel studs.