JRSC C38 High Intake Air Temps
 

I recently bought a used JRSC C38 kit and I'm running the stock size pulley (8psi with headers)
While datalogging I noticed intake air temps were shooting high on WOT runs.
Intake air temps would go 20C+ (35F+) above ambient
so at 25C (77F) ambient temp, the intake air temps would reach 45C (113F)
and at 35C (95F) ambient temp, the intake air temps would reach 55C (131F)

Are these temps normal to see on this setup?
What could the problem be? Failed intercooler?

Any input would be appreciated :thumbup:

very normal
compression heats charge air A LOT
without intercooler you would see even extremely higher values

Pretty normal.

Duct your cooling stack for better results.