Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Issues | Warranty | Recalls / TSB (https://www.ft86club.com/forums/forumdisplay.php?f=72)
-   -   FYI. My 2017 BRZ Throwout Bearing Went Bad (https://www.ft86club.com/forums/showthread.php?t=138519)

Tek 01-10-2020 03:47 PM

FYI. My 2017 BRZ Throwout Bearing Went Bad
 
Hi everyone. I wanted to let you guys know that my 2017 BRZ throwout bearing went bad at 24500 miles. I just took it to the dealer this morning and they are replacing it under warranty. I thought Subaru had fixed this issue but either I got the original part from the factory or the revision didn't fix anything. My BRZ was manufactured in Feb 2017.

YamahaR86 01-10-2020 04:07 PM

Might be using the old part number still. The Revision was in April 2017ish.


http://www.ft86club.com/forums/showthread.php?t=117440

Tek 01-10-2020 04:15 PM

Ah ok. I knew that early 2017 model year BRZs had the old part but thought that was for those manufactured in Sept 2016 - October 2016.

N234 01-13-2020 11:51 PM

Just sharing my experience.

I just had my throwout bearing done Friday. I specifically asked for the new part. The mechanic noted how difficult and finicky it was too install, compared to the old version. It's only been a few hundred kms. Hopefully I remember to post back here with an update.

This is my second bearing. The original seized at 130K. This second started whining at 220K and replaced at 228K (exedy stage 1 clutch may explain the shorter life). Now I have the revised TOB with another new exedy Stg1. Fingers crossed.

Sent from my SM-G930W8 using Tapatalk

radroach 01-14-2020 12:16 AM

@N234 how's the exedy stage 1 clutch? Noticeable difference from stock?

N234 01-14-2020 12:23 AM

It's a touch heavier than stock. I prefer it, but not an objective improvement. It's heavier so it can handle like 40% more torque before slipping.

Sent from my SM-G930W8 using Tapatalk

Tek 01-14-2020 12:33 AM

@N234 Good to know. I'll make sure the dealer uses the new part as well. Thanks!

N234 01-14-2020 09:58 AM

Quote:

Originally Posted by Tek (Post 3289449)
Ah ok. I knew that early 2017 model year BRZs had the old part but thought that was for those manufactured in Sept 2016 - October 2016.

Yeah, you'll want to specify the new TOB part, not just a model year of BRZ/FRS (not related).

I think there's stockpiles of the old part that they will try and pawn off unless you drill down with them...

StraightOuttaCanadaEh 01-14-2020 10:59 AM

I bought mine in Feb 2017, wonder how long it’ll last

reebis 01-14-2020 11:19 AM

Quote:

Originally Posted by StraightOuttaCanadaEh (Post 3290424)
I bought mine in Feb 2017, wonder how long it’ll last

I picked mine up in January of 2017...hoping I don't see this...

DarkPira7e 01-14-2020 11:38 AM

Quote:

Originally Posted by N234 (Post 3290327)
It's a touch heavier than stock. I prefer it, but not an objective improvement. It's heavier so it can handle like 40% more torque before slipping.

Sent from my SM-G930W8 using Tapatalk

Just to validate this, I use the Exedy stage 1 clutch and I'm turbo with ~330whp and 250wtq - no issues holding

wolffbite 01-14-2020 12:05 PM

Checking in at 59000kms... no issues with TOB (knock on wood). Picked the car up April 2017...


All times are GMT -4. The time now is 11:50 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2026 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.