How to add door courtesy light
 

You dont need to go through the door and tap into the dome light.
just tap into the wires in the door

[ame="https://www.youtube.com/watch?v=SjTjz-eEiiA"]https://www.youtube.com/watch?v=SjTjz-eEiiA[/ame]

What gauge wire did you use? also is it necessary to add an in-line fuse or no?

The wire I used was about a 14 gauge and I didn't bother to use a fuse

Jesus Christ dude, do you think you've shared this video enough yet?

It was a pain in the ass to fish that wire through the door so I wanted to make sure no one had to do that lol Sorry XD

I probably won't do the mod, but I appreciate you taking the time to show the process.

THANK YOU for sharing this. This is exactly what I was looking for and I have not been able to find it anywhere!

Can you confirm its same wire colors on the drivers side door?

Yes, I did both doors the same way

This is awesome! I cant believe u were the first one to share this after the car has been out for so long!



I kept putting off this project bc I didn't want to run extra power wires through the door grommet.


Just a small tip. I freaked out after doing this mod bc the window didn't automatically rolled up ~1inch after closing the door. (I disconnected battery before staring) Thought I blew a fuse, but wasn't. Just have to open the window all the way down, then all the way up so the window can reinitialze