STI Motor Mounts
 

Used for about 2 months/2k miles. Worked great just needed something a little stiffer when I went boosted.

SOLD

https://i.imgur.com/UOP2Fx3.jpg

I'm very interested but can you work on the price? These are $259 brand new at subispeed

BUMP. Price reduced

————-
 

———

bump

I'm going turbo soon so I was thinking of picking these up. Are these not stiff enough for FI setup?

Coming from a car that from a car that does have a turbo why wouldn't it be? Also daily comfort. I'm going for the new perrin ones tho.

Sent from my SM-N960U using Tapatalk

Depends on your exhaust setup. I have the jdl 3" dual resonated op/fp combo. The clearance between the 3" pipe and the subframe is so small I needed stiffer mounts so it would stop rubbing under hard acceleration. I think if you had a 2.5" op you'd probably be fine

FYI this is a clearance issue not a motor mount issue. There are a number of threads with the same issue and most report that a few washers on the motor mounts fixed the issue.

Some washers may have helped. But I was running the same exhaust NA with the STI mounts and no issues. Regardless, once I switched to the Cusco mounts my motor is nice and stiff and the exhaust doesn't rub anymore

SOLD