18" Work Emotion T5R - 2PC?
 

After doing some unsuccessful searching in this section of the forum, I have to ask - is anyone running 18x9.5 or 18x10 Work Emotion T5Rs (2pc version)?

I know you'd need the 5x100 -> 5x114.3 conversion to run them, but they're the only 2 pc 5 spoke design I've seen that I'm really loving.

Just wanted to see if anyone here is running them and if so, tire specs you're running as well as any clearance issues around the 17+ sport package brembos.

Thanks!

Well, then...guess not : (

DM System Motorsports on IG, they have those Works and the owner is knowledgeable on FRS/BRZ fitment. I'd probably run 255/35 if I was you

This thread has work wheels sized 18x10. They are a different wheel. Not that many guys run a 18x10, so there are not alot of pics. On the other hand, 18x9.5 wheels are VERY common - tons of pics and info on how to make them fit.

18x10 thread
http://www.ft86club.com/forums/showthread.php?t=38778

info on the 5x114.3 conversion and how to retain OEM brakes
https://www.ft86club.com/forums/showthread.php?t=129799

Thanks for responses guys. After looking into wheel fitment and cost some more, I don't think I'm going to run these in 18x10 form after all.

I'm going to go widebody down the road, so I think I'm just going to look at putting some super sticky tires on the stock wheels for now or buying a cheap pair of used 18x9.5's that I'll run with til I get the widebody kit. I'm planning an engine swap, so I'll need as much grip as I can get, but am budgeting the widebody kit later on simply due to budget constraints.