Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB (https://www.ft86club.com/forums/index.php)
-   Engine, Exhaust, Transmission (https://www.ft86club.com/forums/forumdisplay.php?f=8)
-   -   Manual engine into an Auto? (https://www.ft86club.com/forums/showthread.php?t=136611)

Alfrz91 08-30-2019 10:18 AM

Manual engine into an Auto?
 
I've found a seemingly good deal on a manual engine, would it be relatively simple to take whatever I need off of my blown auto and transplant it into the manual engine to get it going? Or do I need to find an automatic engine?

Soloside 08-30-2019 10:42 AM

They are interchangeable. There's a few things you'll need to remove from your auto engine to transplant it over.

SUB-FT86 08-30-2019 10:51 AM

2017+ motor? If so that's a good look. I love that red manifold.

Alfrz91 08-30-2019 10:54 AM

Quote:

Originally Posted by SUB-FT86 (Post 3252948)
2017+ motor? If so that's a good look. I love that red manifold.

Unfortunately not haha. It would be a 13 manual engine into a 13 automatic. (a recall victim)

Alfrz91 08-30-2019 10:56 AM

Quote:

Originally Posted by Soloside (Post 3252946)
They are interchangeable. There's a few things you'll need to remove from your auto engine to transplant it over.

Thanks, someone said it would be costly but i think they maybe didn't understand the question. This would have to far and away be more cost effective than buying a short/long block, right? Not just on parts, but labor mostly.

Soloside 08-30-2019 11:45 AM

Quote:

Originally Posted by Alfrz91 (Post 3252953)
Thanks, someone said it would be costly but i think they maybe didn't understand the question. This would have to far and away be more cost effective than buying a short/long block, right? Not just on parts, but labor mostly.



would be like an extra hour of labor. I put a manual motor into my auto one.

Alfrz91 08-30-2019 02:02 PM

Quote:

Originally Posted by Soloside (Post 3252968)
would be like an extra hour of labor. I put a manual motor into my auto one.

Perfect. Any idea what installation all ran you?

ls1ac 08-30-2019 06:20 PM

Been asked many times before. Short answer is do not do it. Middle answer is placement and fit is easy, electronics are a bitch. Long answer and all that needs to be replaced and rewired has been answered before.

Alfrz91 09-17-2019 09:41 AM

Quote:

Originally Posted by ls1ac (Post 3253062)
Been asked many times before. Short answer is do not do it. Middle answer is placement and fit is easy, electronics are a bitch. Long answer and all that needs to be replaced and rewired has been answered before.

I couldn't find it anywhere that it's covered or been asked many times before. I've seen the opposite, auto into a manual, but thats not what we were talking about here. Not sure why the short answer would be to not do it if the placement and fit is easy, and the motor's are already out?

Dadhawk 09-17-2019 10:28 AM

Quote:

Originally Posted by ls1ac (Post 3253062)
Been asked many times before. Short answer is do not do it. Middle answer is placement and fit is easy, electronics are a bitch. Long answer and all that needs to be replaced and rewired has been answered before.

Quote:

Originally Posted by Alfrz91 (Post 3258229)
I couldn't find it anywhere that it's covered or been asked many times before. I've seen the opposite, auto into a manual, but thats not what we were talking about here. Not sure why the short answer would be to not do it if the placement and fit is easy, and the motor's are already out?

Are you guys sure you understand the question? My reading of it is its not about replacing the transmission, its about taking an engine that was in a car with an MT and putting it in a car with an AT. It's an engine swap not a transmission swap.

Nawar 10-23-2019 08:22 AM

I have the same Situation here, i want to Transfer an engine from a MANUAL car to my Automatic Car, how hard can it be when the engines are exactly the same, with a difference of Flywheel/Torque Converter

Tcoat 10-23-2019 11:27 AM

Quote:

Originally Posted by Nawar (Post 3268912)
I have the same Situation here, i want to Transfer an engine from a MANUAL car to my Automatic Car, how hard can it be when the engines are exactly the same, with a difference of Flywheel/Torque Converter

The first response here is right. You just have to swap over some parts as you said. There is also a brake booster pump you need to change but no big deal.

Swapping a 17+ engine is where it gets complicated.

finch1750 01-19-2021 02:50 PM

Wanted to cross post since this is one of the top threads, you can find good info here instead

https://www.ft86club.com/forums/show...59#post3400759

I added some posts recently about MT engine into an AT as most people seem to be opposite so the hiccups are a little different and not as easy to solve on the spot.


All times are GMT -4. The time now is 05:18 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
User Alert System provided by Advanced User Tagging v3.3.0 (Lite) - vBulletin Mods & Addons Copyright © 2025 DragonByte Technologies Ltd.


Garage vBulletin Plugins by Drive Thru Online, Inc.