MoTeC on an Android tablet?
 

Is there anyway to display info from MoTeC M130 on an Android head unit like you can with OBD II and Torque? Seems like there should be a way to do this...

standard ecu and ecu firmware is required by law to enable basic diagnostic info logging and code reset via a standard obd interface, if theor was no laws or standards then manufacturers probably would not do it.



Motec being aftermarket and costing mega bucks is extremly unlikely to allow anything but motec systems and add on bits to talk to a motec ecu, ie they will want to sell you their bespoke system likely expensive.

Well for those who are curious I found a solution from these guys gaugeart but I have to say it looks pretty GHETTO.

https://gaugeart.com/product/gaugear...gauge-adapter/

anyway if you read latest changelog of Ecu Connect android app of ecutek, it says "fixed connection to GT R motec ecm"
so it does read motec ecu
so maybe even brz gt86 ecu, but you need ecutek bluetooth obd

You could use build to send out any CAN data the ecutek or oem sends.

Better yet get a color dash and be done.