valenti tail lights wiring switched
 

I got some non sequential valentis, but the signal and brake lights wiring is switched. The brake lights turn on when i signal, and signal lights work as running lights and brake lights. Anyone had this problem?

im going to swap the 2 wires for signal and brake, and hopefully that fixes it. But im not sure if it will also fix the running lights...

i recall seeing that issue with jdm-sourced tail lights. there was a how-to for a different set of tails to do the same thing

I got some Spyders and they came with instructions for swapping some wires like this depending on which market the lights were sourced from/installed in. As I recall they sold the lights with the wiring done in one of two different ways depending on which market they were sold in, and the instructions told which wires to swap if you were in the other market.