EcuTek pops tune (sport mode)
 

Dear


How can to tune stock ecuTek rom for pops and backfire ??


I have 2013brz has ecuTek license

It was turbo

But now he revers to stock

Just he need pops and back fire



I have stock ecuTek rom and cable + USB dongle



I need to activate pops just at sport mode







Thnx to all :)

Do you have racerom license? (350$ more or less)
without it you can t modify stock roms, neither use custom maps

Yes there is racerom

any update

Can t make screenshots in these days,
You need to create a custom map, make its X-axis and Y-axis identical to your Ignition advance map VVt on (X is engine load, Y engine rpm), and then on the first column (usually 0.15 load) fill the table from 3k rpm to redline with , for example,a value of -40
On the custom map "enable" table, put a tick on the map you want it to work on, AND on "enable map in Vsc Sport mode" only
Custom map "output definition" table: Ignition Base timing, Add map output to channel value

thnx alot



right now ecutek cable not with me to open proecu





can u plz send some images for reverance;)


ill try too do it 2morrow



thnx again

i m few days away from my car and computer, follow my post and you shouldn t go wrong, in case post screenshots

Why would you need to make a custom map? Because you only want it active in sport mode? You could also just pull timing out of the ignition table for tune two. Same idea? Have tune 1 normal and turn 2 crackle.

Yes to have it. With vsc sport, it s good also to have it on command like that instead of dedicate one entire map to it