OFT Stalls on Cold Start
 

Today is the first time my car was started in 10 degree weather. It started fine, but stalls when I release the clutch. I had to hold the gas for awhile to prevent it from stalling again. I have OFT stg 2 plus. Any advice on a fix?

You on e85 ? Or petrol

Petrol

increase base idle speed in the idle tables at those temps where you have issue

double the values in lines 1 and 2 of the maf correction after start tables both in gear and in neutral at the teps your having issues at and at temps below below

Okay, I’ll try it when I get home. Thanks!

Tomorrow my car will be outside in the cold and I can’t find maf correction after start in rom. Where is it?

Your defs may not jave those tavles defined


What is your calid ill see if i have a better definition

I think it's either in A/F Sensor or Fueling - Cranking?

My Calid is za1jb01c

Any luck on a different rom definition? I found a photo of where it should be and it’s definitely not on the one that came from OFT.

Steve has always EVERYTHING anyboy would ever need about tuning this car's ecu, in his signature's links

http://www.ft86club.com/forums/showp...&postcount=411

first definition is good for you if you have a B01C tune

You using oft v4 or older v2 tunes ?

If your oft v4 tune use defs here, you will need to modify calid in def this is for 2012-2016 cars


http://www.ft86club.com/forums/showthread.php?t=126180

Yes, I'm using V4. So the 2012-2016 A01G will work fine with my B01C?