Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB

- Software Tuning (https://www.ft86club.com/forums/forumdisplay.php?f=88)

- - Trying reading an EDM MT 2018 GT86 (https://www.ft86club.com/forums/showthread.php?t=131433)

Trying reading an EDM MT 2018 GT86

Hi guys, as per the title I'm trying reading a 6MT Toyota GT86, same as BRZ. It is a May 2018 car, ID K00G.
I use subaruBRZ SH72531 in ecuflash 1.44.4799
But the file I obtain is a 1248Kb file instead of a 1280Kb file. I have tried two times with the same result. File attached
Any idea of what's going wrong?

Tried with another device (Alientech kess) and I finally have a 1280Kb file. It seems that ecuflash doesn't fill the initial and final part of the file with 00 (or FF) to obtain the 1280Kb file.

Seems weird, I read my MY18 - same call ID K00G - easily with Tactrix and standard Subaru BRZ mode!

Quote:

Originally Posted by eTiLiKo (Post 3155572)

if you save file in ecuflash as SRF format file will be larger as it contains extra info for tactrix guys use as well as rom/tune data.

Just save the read file as BIN format and you will be fine
It will pop up an error about some data lost but that ok it will save the 8000-13FFF section ok.

you will then end up with same file as you read/saved with Kess V2