Reverse Camera - install question
 

One of the things that I am wanting to do when my 86 arrives is fit a reverse camera.
Can anyone with knowledge of these please answer the following:

Is the wiring harness already installed in the GTS, i.e. I'll only have to plug the camera in one end and then make sure the harness is plugged in to the head unit at the other end. The reason I ask this is that the camera that I believe will fit (Eclipse BEC-108 http://www.woofersetc.com/p-8263-bec...ead-units.aspx) comes with a harness. Not worried about having to run wires etc, but then again want to know what I'm getting into.

Can anyone confirm that the previoiusly linked camera is the right one that will work with the GTS head unit, I really want a plug and play unit.

Do you need to wire something to the gear lever in order for the camera to acitivate or does the existing wiring already accomodate that.

Does anyone know of an aussie retailer that sells Eclipse cameras.

Has anyone already done this and can tell me of any problems or issues.

I have had a look at a few of the forums here already that deal with reversing cameras but can't see answers to my questions.

Thanks

It's the same camera and harness for all current f-ten Toyota head units (with the 6inch display). The one you listed is the same as the one from dealers, just that the different toyota part numbers give you different instruction manuals specific to models.

Running the harness from the HU to the back is the easy bit. The hardest bit is to cut a section near the rear number plate light for the camera bracket.

From memory no other wiring is required other than the factory harness.