FS: BRZ Part Out (Full Race Turbo Kit, Perrin, Racecomp)
 

I'm returning my car back to stock and will be parting out all parts (installed or brand new) that I have for the BRZ. Have the new car on the way so the car will either be traded in or sold privately.

Full Race Turbo Kit (7163 twin scroll plus goodies) - $SOLD
I'm still deciding whether to part it out or sell everything as a package. This setup made around 400 whp with E85 at DBW Motorsports (dyno pic below).
I have put probably around 2000 miles on this kit (I live about 5 mins from my office).

• Full Race Turbo Kit with 7163 EFR Twin Scroll Turbo
• Ceramic coated turbine housing and turbo manifold (turbo manifold has some scratches on the front side, but they are minor)
• Turbo Source Inconel Heat Shields for the turbine housing and downpipe
• Turbo Smart 14 psi Twin Port Internal Wastegate
• Moto East Flex Fuel Kit
• AVO Denso 240 liter/hour Fuel Pump Includes the Full Assembly for a drop in install
• Oil Pan with Bung Welded in
• 850cc Injector Dynamics Injectors
• Electronic Boost Control Solenoid with harness
• Full Race Vacuum Manifold
• Radium Catch Can (can be used for either PCV or Crank Case, I have both brackets)
• I can throw in the Competition Stage 4 Clutch. I had a Stage 3, but had to immediately replace it with the 4.
• I will include both the TurboSmart clamps as well as the original t-bolt clamps
• I had an Omni 3 Bar Map Sensor, but the sensor snapped when I removed it from the intake manifold. This will need to be replaced.

http://i89.photobucket.com/albums/k2...psgzflx1du.jpg
http://i89.photobucket.com/albums/k2...psjrdnfenm.jpg
http://i89.photobucket.com/albums/k2...psks2miywd.jpg
http://i89.photobucket.com/albums/k2...psrbkzzsej.jpg

Perrin 3" Catback - $SOLD
Used for about 15k miles, still in great condition, some minor wear on the flex pipe
http://i89.photobucket.com/albums/k2...pscyu7xumm.jpg

Avo 3" Front Pipe - $75 obo
In good condition, it's just collecting dust in my basement since I got the full race kit.
http://i89.photobucket.com/albums/k2...psrnjboz17.jpg

Perrin Control Arm Brace - $SOLD
Never Installed
http://i89.photobucket.com/albums/k2...psyoj03scz.jpg

SPC Adjustable Rear Lower Control Arms -$SOLD
Never Installed - I'll also throw in the front camber bolts, also never installed.
http://i89.photobucket.com/albums/k2...psbgnj65fg.jpg

Racecomp front and rear sway bars - $SOLD
Never Installed
http://i89.photobucket.com/albums/k2...psbarhquir.jpg

I have a few more items, but I haven't gotten around to taking pics of them yet (RCE Tarmac 2 Clubsport Coilovers, SSR GTV03 18"x8.5 wheels powdercoated hyper grey, STI Motor Mounts, TRD painted side skirts, Five Axis unpainted rear valences)

PM sent

Sent from my SM-G935P using Tapatalk

Interested in the perrin exhaust. Can you post a pic or send me a pic of the wear on the flex pipe?

Please text 8087251577

PM'd

Pmd

Catch can still for sale?